Sign up ×
Electrical Engineering Stack Exchange is a question and answer site for electronics and electrical engineering professionals, students, and enthusiasts. It's 100% free.

Are there any good data rate(~Mbps) RF modules available in market that can be interfaced with Digilent Atlys Spartan®-6 FPGA Development Kit ? Thanks in advance.

share|improve this question

closed as off-topic by Connor Wolf, PeterJ, Anindo Ghosh, placeholder, Matt Young Aug 20 '13 at 16:22

This question appears to be off-topic. The users who voted to close gave this specific reason:

If this question can be reworded to fit the rules in the help center, please edit the question.

3 Answers 3

I would ask Digilent. Also what interfaces it has would help.

share|improve this answer

I'd check out Comblocks offerings. We got some of their stuff recently and so far I'm pleased.

share|improve this answer

Any module working on 2.4GHz ISM, will easily do 1Mbps and for sure 2Mbps.

You have Nordic, TI and some others.

share|improve this answer
Untrue. Base frequency does not determine bandwidth. – Chris Stratton Aug 20 '13 at 13:20
Can you do 1Mbps on 868MHz? If so, please let me know what modules are available for that. thanks. – Sérgio Sena Aug 21 '13 at 14:17
Of course you can - it's a question of regulatory approval not physical or technical capability. You could, with moderate difficulty, do 1Mbps way down on the HF bands technically, it just isn't allowed. It goes the other way too - plenty of 2.4 GHz ISM devices do not support 1 Mbps data rates, because they weren't designed for applications which need that, and because the signal to noise ratio (transmit power, receive quality, antenna gain) increases with the supported bandwidth, so low data rate devices are more efficient solutions when only a low data rate is needed. – Chris Stratton Aug 21 '13 at 15:55

Not the answer you're looking for? Browse other questions tagged or ask your own question.