Take the 2-minute tour ×
Electrical Engineering Stack Exchange is a question and answer site for electronics and electrical engineering professionals, students, and enthusiasts. It's 100% free, no registration required.

While ordering free samples from Maxim I have often seen components packaged as µMAX.

What is µMAX? When googling for it all I get are some Maxim components. If I look at google images I get an assortment of SMD and DIP package pictures that bear no resemblance to one another.

Is there a comprehensive list of component packages (cross-provider) around anywhere?

share|improve this question
add comment

5 Answers

up vote 11 down vote accepted

Whereas most packages are used by several manufacturers, \$\mu\$MAX seems to be a package solely used by Maxim. It's an 8 pin SMT package, about as wide as an SO-8, but just 3mm long instead of the 5mm of an SO-8. This is achieved by using a 0.65mm pitch instead of 1.27mm.
Other manufacturers also go to ever smaller packages, but most often choose for leadless packages like DFN (Dual Flat No Leads).

enter image description here


Intersil has this list of packages.
NXP has this list.

Unfortunately my experience is that recommended footprints for a certain package aren't always consistent between manufacturers.

share|improve this answer
3  
Looks like yet another reason to avoid Maxim parts. This one is guaranteed to have no substitutes if Maxim is the only one using this package. I expect it has a unusually high unobtanium content. –  Olin Lathrop Jun 23 '11 at 11:44
1  
Why can't they just all stick to a standard instead of each manufacturer making up their own packages??? –  Majenko Jun 23 '11 at 12:37
1  
@Matt - they mostly do, this is an exception. There are dozens of package types to choose from, so this looks rather pig-headed. –  stevenvh Jun 23 '11 at 13:01
    
uMax is just maxim's name for TSOP/SSOP - Where is the problem here? –  Connor Wolf Jun 24 '11 at 1:18
1  
@Fake - I haven't compared them parameter by parameter, but if that's right it's even worse. If you follow a standard but name it differently you're only confusing the customer, and you risk that they will react like Olin. (Are there 8-pin versions of TSOP?) –  stevenvh Jun 24 '11 at 6:46
show 3 more comments

Just download pdf datasheet for component of interest, and in the end there will be images of all packages with exact geometric sizes & pin locations.

share|improve this answer
1  
Recommended footprints, which are as important, are usually not included in the datasheet, but in a more general document. Often harder to find :-( –  stevenvh Jun 23 '11 at 13:06
add comment

Comprehensive list of maxim packages here:

http://www.maxim-ic.com/design/packaging/

share|improve this answer
    
Most important information here. –  Jay Keegan Aug 22 '13 at 14:19
add comment

As far as I can tell, µMAX is Maxim's idiotic name for the standard TSOP package.

They certainly fit on the TSOP footprint from the Altium Designer software, anyways.

An 8-pin µMAX is pretty much identical to a standard 3*3 mm body TSOP part.

share|improve this answer
add comment

enter image description hereμMAX packages (Maxim uses 8-pin and 10-pin versions of this package) seems (by PCB footprint at least) the same as μSOP aka MSOP aka micro-SOP packages.

This is specified on "Package Information" of the datasheets, where there is always 8L (or 10L) uMAX/uSOP specification present.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.