Voltage divider with offset

Question

I am trying to build a voltage divider with an offset. I have an input signal of 10 Vpk and I want it to have a DC offset of +1.65 V. The problem is that I don't have a DC source of 1.65 V, but I do have 3.3 V (2x 1.65). I tried to solve this with a resistor, but then I realized there was no current flowing from the source.

^{simulate this circuit – Schematic created using CircuitLab}

Thanks

Answer 1

^{simulate this circuit – Schematic created using CircuitLab}

Answer 2

You might want to try something like this: