As the question says, I've been looking for the best way to bond strain gauges to Acrylonitrile butadiene styrene (ABS). It will be a circular cross section ABS piece. I'm not sure if this is an electronics question per se, but the application is in this field. If not, I'd appreciate it if someone were to point out which forum to ask in.
[Further explanation: to be used for a torsion testing machine as the sensitive element which measures the torque applied on the specimen, which would be some sort of bone substitute. The torque is low, around 2 Nm, which is why I need a material which exibits more strain than aluminium or the like. ]