We have to develop a data logger. I should get some data over CAN (1 MBit/s), compress this data and save it to an SD card. To save time, we would prefer to use as much existing hardware and ...
I read a lot of stuff regarding CAN bus arbitration, but it didn't answer my questions. If one node is already transmitting the data on the bus and in between another node wants to initiate the data ...
I am running a short (2 m) CAN bus with about 20 nodes. 1 Mbit/s speed, PIC 18F2580s and 18F4580s with MCP2551 transceivers, 10 MHz (with PLL to 40 MHz) crystal oscillators. Both ...
I am using the MFC5253 controller. It has two CAN channels, CAN 1 and CAN 2. In my project, I am using both of them. Their registers are the same, except for the name (1 and 2). I can transmit and ...
I am trying to get a CAN bus sniffer working, based on LPC2368. I keep getting a bus error interrupt, of type "form error". I suspect my timing settings. I verified that the sending party is ...
I am planning on using CAN bus in an industrial automation application, however I'm having a hard time deciding how to implement the network layer. Does anyone here have any recommendations for a ...