I understand that ceramics are good at ESR but would like to know if tantalum would suffice for my application. Some 16 bit PICs require a >4.7uf cap (10uf recommended) low ESR cap for their internal ...
I am trying to figure this cap out and locate a new one. It says 107K and 10K on it. Is is polarized ? what is it and where do i find one ?
I use 78L12 or similar voltage regulators in a few power supplies. I use them in their basic setup, see the picture: This diagram is common for all 78xx and 78Lxx regulators. It says that output ...
I'm planning on using an LM1117 to regulate 5v to 3.3v. Looking at (any of the several) data sheets for the LM1117, they recommend 10uF Tantalum capacitors between input and ground and between output ...
I'm going to make a PIC programmer, so currently I'm acquiring parts that I'll need. And here's the one part that I can't get: ...
I was originally considering using a 10u 6.3V 0603 ceramic capacitor for stabilising the onboard voltage regulator on my microcontrollers. However, it may not be capable because of temperature ...