Tagged Questions
2
votes
3answers
112 views
What the name of this connector?
I've spent a load of time looking for the answer to this question, but I cannot find it. What is the official name of this connector?
4
votes
3answers
155 views
How to find socket for keyboard connector?
I am looking for a socket which is able to receive the connector of the ThinkPad X41's keyboard. How do I identify the socket so that I can find it on the (German) market?
Background: I want to build ...
1
vote
1answer
83 views
Help identifying 1.27mm spring-loaded connector
I'm planning building a small board that will interface with a connector pad that has pins with 1.27mm spacing between them. It has 26 pins in total but only about 5 are actually required.
I'm ...
3
votes
2answers
132 views
Connector name for angel eyes CCFL inverter
I have a CCFL inverter for my car's headlight angel eyes. It seems they all respect some standard connector, but apparently the manufacturer of my headlights didn't get the memo :P, so until now I've ...
2
votes
1answer
69 views
DRO scales 4-pin connector identification
I've purchased some scales for use with a mini milling machine and the open source DRO-550 digital readout platform. They are essentially equivalent to permamenet mount digital vernier calipers so ...
4
votes
1answer
70 views
Connector type?
I am trying to find the connector type (see links below) for some time with out success.
The pitch is ~1.5mm.
2
votes
3answers
161 views
Help me identify the adapter jack
just met an industrial computer which has the following power adapter jack. how to identify this jack and where to find? (actually there are lots of different jacks here and there, how to identify ...
3
votes
2answers
156 views
How to Identify a Power Receptacle
The Wavetek 144 HF frequency generator has an unusual power receptacle that I cannot identify. The link references the manual, which does not name the part. I'm not sure it isn't proprietary. Here is ...
0
votes
2answers
221 views
What is this connector called?
I need to repair some kit that uses several connectors like the one pictured below. The existing connections have become brittle and are breaking off.
The wires appear to be crimped into the ...
4
votes
2answers
245 views
What are those wire terminals that mate with standard header pins?
I have purchased "dupont" connectors on Ebay that crimp onto a wire. They look like this:
http://www.hansenhobbies.com/products/connectors/pt1inconnectors/pt1in_ft/
I'm tired of waiting weeks for ...
3
votes
1answer
266 views
Can you identify the Xbox 360 battery pack connector?
This is the contact used on the Xbox 360 battery pack. Is it a custom part that was made for Microsoft or is it an of the shelf part? If it is a custom part is there anyway I can replicate it short ...
0
votes
1answer
76 views
Power Jack connection switch pin?
I was looking at a this CUI power jack connector and I noticed that it has a switch which is NC, and I think goes open when a connector is plugged in (pin 2/3).
There's no clear distinction I can ...
1
vote
1answer
178 views
What is this 4 pin connector called?
I tried connecting the one on the left with the 4 pin fan connectors on my computer PSU, but they are not compatible.
0
votes
1answer
114 views
CON1 to USB connector cable [closed]
I have a board which has a CON1 connector being currently used for a battery. Are all CON1 ports serial? Why would a battery need a CON1 port?
My guess is, this port can be used to interface and ...
8
votes
2answers
326 views
What is the name of this connector?
These rectangular 2x5 and 2x3 pin connectors seem to be commonly used for flat ribbon connectors. This example is from an AVRUSB programmer. What is the name of this style connector?
0
votes
3answers
190 views
Name this electronic connector
Pins = 16x2
Space between pins = around 2mm
What i really need is the name of a female adaptor to connect to it in order to have cables like this. Thanks!
1
vote
1answer
197 views
What's the name of this small connector?
I would like to know what's the name of the connector on the side of the PCB? It's really small. Width: ~ 5 mm. Height: ~ 1.2 mm.
3
votes
2answers
157 views
Breadboard type of connector
I'm looking for a single contact, female connector that I can solder on a PCB and insert components or wires in - exactly what a prototyping breadboard is made of but I want them standalone.
0
votes
4answers
278 views
What is the universal name for this cable and where can I get PCB connectors for them?
What is the name for this style cable? I've always known them as nano-cables or micro-cables but I've seen them called sensor-link cables too.
I typically get the cable from here. However, I don't ...
1
vote
3answers
278 views
Is this 'pmod' connector standard?
Here's an image of my Digilent Coolrunner II development kit:
Those connectors on the backside are 6x2, female, and seem to be on .1" pitch. Are these standard, and where could I buy the male ...
4
votes
3answers
366 views
Whats this connector pictured called?
Can anyone identify the connector on the right of the picture?
A picture of the same, taken from a different angle:
2
votes
1answer
101 views
Identify this flat connector
What is this connector (and the eventual pliers used for it) that serves for Wago 256 terminals.
2
votes
2answers
156 views
What is the part number for a SIO connector?
What actually is an Atari SIO connector, if I wanted to order the part? I have tried Farnell for DB13, Dsub 13 etc but no joy. I am assembling a SIO2ST for an 800XL.
1
vote
0answers
87 views
Does anybody recognize the 4way automotive connector? [closed]
The picture is as this I just know it's used on vehicle ignition.
thanks...
4
votes
1answer
131 views
Does anybody recognize this connector?
Does anybody recognize this connector? This is Power terminal used on Solar Inverter. Rated for 150A/35V.
1
vote
2answers
166 views
Does anybody recognize this (other) automotive connector?
Similar to my other question, I have another connector I can't identify. Does anybody recognize the series? I am wanting to build my own, so I need to know what series it is and what pins it ...
-1
votes
1answer
128 views
connector without a name?
I am trying to find the name of a particular electronics connector. the connector is often used in auto stereos to attach a faceplate to the main body (detachable face radio). this is much like a dual ...
0
votes
0answers
106 views
Whats the name of this connector?
and where can i buy the heads. its not very clear on the picture but the lower left slot is + and the top is negative. If its attached to a 120V in, 24 V 70 W out AC power adapter thats even better.
...
3
votes
1answer
162 views
FFC Connector Identification
I need to design an FPC to couple to an existing board. There are 3 FFC connections on this board. I believe them all to be Molex connectors but I still can't locate a similar part. Here is what I ...
5
votes
4answers
233 views
Does anybody recognize this automotive connector?
I'm trying to repair a wiring harness, and I'd rather pin and install a connector than splice into a junkyard pigtail. Does anyone recognize this and know where to find them? There's some serious ...
2
votes
0answers
182 views
Please help identify this exotic, probably Japanese board-to-wire connector
Found on an early 90's JVC stereo: 2 rows, 11 pins, the two rows are horizontally displaced against each other, kind of like a SUB-D connector. However, the pins are neither round, nor quadratic but ...
1
vote
1answer
172 views
UART adapter to… what is this connector's name?
Any idea of what the connector from the right is named?
2
votes
1answer
117 views
Sound card CD audio in connector
The typical name I see given is MPC, MPC2, or MPC-2, and the cables are readily available, but I can't seem to source the female PCB-side connector. Obviously, a 1x4 pin header would work just fine, ...
6
votes
1answer
214 views
Help Identifying Non-Standard USB Connector
I need help in identifying a part and finding a source (if possible) for a non-standard USB connector... at least I believe it to be non-standard. I've attached a few pictures which are focused to the ...
1
vote
3answers
189 views
Identify this connector
I got this connector in a CIS sensor board
the connector is 18 pin , dimensions (around 5mm X 18 mm )
Here's some images for it the male & female
1
vote
3answers
493 views
What are these white connectors called?
What are these white connectors called? I'm assuming they have a common name, with different numbers of pins.
Update: better pictures, showing "BM Z" on the board connector. The board is ...
1
vote
3answers
479 views
Identify this 2-pin, grid-style, wire-terminated connector?
Can anyone help identify the type of connector in the picture below?
I need to make an extension cord for an electric bicycle's control throttle which happens to have that connector on it.
0
votes
1answer
934 views
What does “MXJ” on a connector mean?
I have several tiny connectors ( about 1 mm pitch, various numbers of pins per connector ) that have the letters "MXJ" molded into them.
(I wish I knew what company the are from, or even better the ...
2
votes
2answers
198 views
What are these wires with pre-attached connectors called?
What are these connectors commonly called, and what would I search for if I wanted to buy sets of male/female pairs with a specific gauge of wire pre-attached?
