I have built a transmitter/receiver with an antenna and crystal. I am wondering if it is stable. Here is my transmitter: simulate this circuit – Schematic created using CircuitLab Here ...
I am trying to make a transmitter and a receiver, I have two crystals and two antennas (basically a straight piece of metal with plastic covering), how could I make a transmitter and receiver with ...
I'm trying to receive CAN messages from a radar, whose specification define the following data for bit timing: ...
Why do Arduino boards ship w/ 16MHz crystal instead of 20MHz? They are spec'ed for operating at 20MHz, after all. I guess there are a few advantages to running more slowly (lower power consumption, ...
I'm using the Microchip MCP79411 Real Time Clock. I can communicate with the device, read the MAC address from it, write to the EEPROM function and read back those values, but the Time and Date ...