I've got an ENC28J60 Ethernet Controller in a circuit I'm building. I was testing it out but when I got to the point of talking to it over SPI with my micro-controller I got utter silence back from ...
I use the ENC28J60 MAC+PHY ethernet controller (datasheet) in a fairly standard setup as shown in the schematics below. I can talk to the ENC via SPI, but I cannot get a link-up when I plug in an ...
I have a problem with a relatively simple board which consists of an ENC28J60 Ethernet controller and an ATmega168. The circuit around the ENC28J60 is straight out of the datasheet and I have the ...