I have following wire as shown below, one end has male USB connector and other end has four wires. I know, when connected to laptop, the RED one acts as voltage source and BLACK as ground. If I give 2 ...
Is the Ferrite Bead really necessary in a USB project? I want a general answer so I might learn, but in my case, I am using a PIC18F2550 Full Speed USB.
I'm an undergraduate member of a research team working on a project that involves an RF-transmitting ASIC, and its wireless receiver which should ultimately send data to a PC. The receiver outputs a ...
I am looking to setup device(s) that measures levels of impact / pressure and which then can be transferred via cable back to a computer for analysis. Ideally I want to buy a premade solution that is ...
I'm trying to come up with a simple way of sharing a USB peripheral between two USB hosts (computers) so that the host that is currently turned on controls the peripheral. I'm targeting low-speed ...