I need a logic circuit to have a function as shown in the figure: An input signal applied to the input end, I want it to only output the odd numbered pulse and output 0 for the even numbered pulse. ...
Can anybody show me how to make divider by 3 frequency using flip flop and logic gate ? Does anyone here have any good suggestions ?
Is it possible to multiply the frequency of a digital signal using digital components alone, and at the same time, preserve the duty cycle? I could finally come across the circuit below: it doubles ...
I'm trying to scope out what frequencies different common analog signals are. The DPScope design specs provides a list of common lower (sub 1 MHz) frequencies (copied below). audio (20 kHz) ...
I have a clock that is running at 25.175MHz I want to run that signal through some basic logic gates from the 74HC series. I have looked on the datasheet for the 74HC08 (AND Gate), I can't seem to ...
Important note: You are not helping me do my homework. This is for a competition for engineering students, that encourages you to "use your network" ;) I've got this pattern for a frequency divider ...