The following chip seems to be acting funny. http://www.ti.com/lit/ds/symlink/sn754410.pdf I have one DC motor hooked up to 1Y and 2Y and the other to 3Y and 4Y. Could the behavior be because I ...
Im using TC1412 MOSFET drivers on an H-bridge for a motor, the datasheet says the drivers are protected against 5kV of ESD. Is it necessary to use a flyback diode on the output?
I'm thinking of buying a pair of L298Ns, to control a pair of 1.6A motors. I'd like to control each motor with a signal PWM wire and a direction wire. However, I've hit a couple of problems. It is ...