I am carrying out a design with a driver:74LVC1G125 datasheet of 74LVC1G125. Signal that will go through this driver is about 600khz so I have to know the bandwaidth of 74LVC1G125. I have read the ...
I am trying to figure out how to use an SN75441ONE h-bridge. I have it hooked up like this: Pins 1, 8 and 16 are connected to the positive rail (+5 V). Pins 4, 5, 12 and 13 are connected to ground. ...
The title pretty much says it all. I have a PC Instruments PCI-430 digital oscilloscope, but don't have the OEM software CD. Specifications for scope show that it is a 350 Mhz Dual Channel scope ...
How does parasitic capacitance affect an ideal signal? Ie. We have an ideal signal shown below, what would it look like with parasitic capacitance accounted for?