How can I switch between a power source and a battery using mosfets isolating the battery on a separate charge line?
I have a 24 volt computer with other peripherals connected to a lifepo4 24 volt 40 ah pack The power consumption varies between 20 and 35 amps continuously. I have an external connector that carry ...
Is it possible to supply power to a very high load within a huge time range? This question particularly regards MOSFETs. I know that a MOSFET must switch fast so that a little power would develop ...
I have the same problem as the guy in this question, but in this case the input voltage varies from 20 volts to 28 volts. I would like a current of 20A to flow through the mosfet without it getting ...
I have this circuit built (updated to remove short-circuit): I'm experiencing some weird behavior though that I don't understand. 1. When I close the switch, nothing happens. No current flows ...
I am wanting for safety a uC to determine a few environmental checks before a device is allowed to be activated, it is a relatively low voltage (2V) however high current (4A) load (powered by a beefy ...