I'm planning a custom power-distribution / fuse-board for in-car application, but that requires carrying high currents (50A+ @12v*) on a PCB trace. Since I'd like to keep the board cost, and physical ...
I am planning to use a DC drived SPST reed relay. Below I include the spec for voltage, current and power ratings. Contact Rating: 200W Carry Current: 5A Switching Current: 3A Switching Voltage: ...
I need to pass high current on some part of my circuit. I used an online PCB track width calculator to see that required track width is about 5mm and minimum clearance is 1mm, which makes it about 7mm ...