I've been studying some vlsi lately and came across instances where the author mentioned that it is easier to use MOSFETs at the micron level than it is to use a resistor. Therefore at many ...
As far as I know, a typical MOSFET is driven by a circuit like below. I read several MOSFET driver IC datasheets. It looks like they have a more complicated internal structure. For example, the ...
Besides the reason that electron mobility is higher than hole mobility, what are the other reasons of preferring an N-channel over a P-channel MOSFET?
I am trying to use the following MOSFET (N-Channel) to turn an IC on and off. http://www.diodes.com/datasheets/ZXMS6004FF.pdf In my test circuit I connected 5VDC to the drain of the MOSFET and then ...
Do I need to duplicate the 4th “substrate” connection when building CMOS gates out of discrete transistors?
All CMOS digital integrated circuits I've ever seen connect all the nFET substrates together to GND. In particular, the IC CMOS NAND gate has one nFET that has its substrate connected to GND, but its ...