I've built a system using a pressure sensor on my chair, which in-turn controls a switching-relay such that when I get up from this chair, power to all my LCD screens is switched-off by the relays, ...
I have built a circuit which contains an integrated power supply stepping down mains voltage to 5v through a transformer, rectifier circuit and a voltage regulator. With a couple of smoothing caps the ...
I have got an old-STN-LCD which needs a very negative voltage, -21V..-24V are required in order to do the proper contrast, a current of less than 200nA is required, the LCD controller also requires a ...
The LCD's original power supply has the same conectors as a regular PC power supply. My main concern is if the PC power supply has the correct specs to be used by the LCD. The original power supply ...