I have an ATtiny85 and I'm trying to set the clock to 8 MHz. I have read the data sheet and some discussions on how to do this but am not having any luck getting it to work. I have included my code ...
I am building a Persistence of Vision project with 120 RGB leds (=360 total lines to be controlled). We have settled on the TLC5940 for driving the LEDs (and could be open to changing this), however, ...
I was reading about arduino and the AVR architecture and got stuck at the point that how does pipeline stall or bubbling is solved by Harvard architecture introduction in the AVR.I mean what Harvard ...
How could I pass a string for EEPROM write first and read in the code as: ...
I am making 16*16 keypad(on PORTB and PORTD) with ATMega32 using proteus 6.9 and AVRstudio5. My problem is PB7 and PD7 won't work when pull ups on those pins are enabled. Here PD7 is output, so no ...
I am complete virgin in Electronics. Though I am very experienced in Programming. I've never played anything with electronics. What are the Specifications of Microcontrollers ? No. of digital ...