I am using an AT86RF233 radio connected to an MSP 430 micro-controller. I need to write a function similar to line 92 on this page. This function (trx_frame_write) is supposed write a frame for ...
In our design, pin 4.7 of msp430 is connected to the KILL pin of the ON/OFF switch IC which is active LOW. So when ever I set the pin 4.7 as output in DIR register, the whole circuit turns OFF even ...
I am planning to use MSP430F6638 for SPI Communication between a single MSP430 Master and multiple MSP430 Slaves. I am using a 4x16 Multiplexer before each Slave for providing the Chip Select Signal. ...
I am working on a firmware project in which i have to do a crc16 check for flash integrity. Controller: MSP430 IDE: IAR EW 5.40 (Linker Xlink) The crc is calculated using IAR Xlink linker and kept ...
I have a USB to ethernet chip (USB 2.0 480 Mb/s) and a microcontroller (MSP430F550x family, full-speed USB 12 Mb/s) that connects to a USB hub (USB 2.0 480 Mb/s). How would I make these work ...
I'm developing a measurement application with the TI MSP430 and I would like to hear some suggestions on what type of memory I can use. The idea is to use it for logging during a certain time and ...