1
vote
0answers
66 views

PWM only works after touched with oscillicope probe

I am using two PWM outputs from a Netduino 2 to control two servos. One of the PWM pins works perfectly fine but the other doesn't work until I have touched it with an oscope probe. The probe doesn't ...
0
votes
1answer
143 views

Netduino Interrupts Affected By PWM - Diagnosis of Issue

I've got a funny problem with interrupts and PWM signals that's causing false interrupts to trigger. What exactly is happening is that I'm using a hardware debounced quadrature rotary encoder. The ...
1
vote
1answer
250 views

Netduino + Mosfet Driver + PMDC Motor = Magic Smoke

I have an old treadmill motor: Motor Specs: Permanent Magnet DC Motor Electrical Rating: @130vdc 2.5hp 6700rpm 18amps Continuous Duty @95vdc 1.5 hp I need a speed ...
2
votes
2answers
586 views

How to switch control between 2 RGB LEDs with PWM from a Netduino

I'm building a project where I will be lighting up 2 RGB LEDs using PWM. Since the Netduino only has 4 PWM pins (of which I will only use 3 - one pin each for the R, G, and B values respectively), I ...