I want to put decoupling caps (0603) as close as possible to TQFP-48-7x7. So PCB/assembly wise how close I can put them (pad to pad, component to component)? Does the 'court yard' need to be exactly ...
Are there any tricks I can use to connect a QFP (or similar) package component to a stripboard (veroboard), without the hassle of setting up a personal PCB fabrication kit to make a breakout board? ...
VSC7145XRU-31/C - this IC uses PQFP package the replacement component for that TLK2201 uses HVQFP package also TLK2541 uses TQFP that's why i wanted to know whats the clear difference between ...
I'm putting together a footprint for a 100-pin, 14x14mm TQFP, and I'm finding conflicting designs. The pitch and width of the pads are all basically the same, but the length and centering of the pads ...
In my PCB editor, both LQFP and TQFP have the same footprints, except the TQFP has shorter leads than the LQFP. Is that the only difference?
I'm trying to set up a PCB with an atmega168 and no programming header. I intend to use a serial bootloader (there is a ft232 on the board) to reprogram but I am wondering about the best way to ...