Why might a multimeter ask for the "wrong" sizes of fuses? On the front of my Fluke 87 multimeter, the two probe ports for amperage are labeled as fused at 10A (max) and 400mA (max). When opening the ...
I have a BK Precision 2709B Multimeter. I managed to blow the uA fuse (500mA/500V fast blow ceramic) on it. Is it an ok to replace this fuse with a 500mA/1kV fast blow ceramic fuse? What impact would ...
don't know if this is the right place to ask such a question but i'll try. I opened up my DMM to check fuses. Now I would like to close it but before I can do this I have to put in the right place the ...
is it possible to repair a DMM which was burned by putting the leads into 230V on a frequency-measuring setting?
There is a DMM (not a cheap one, so its worth to repair it), whose leads where put into a 230V AC socket on the frequency measuring range. The meter did "bzzzt" sound and stopped showing anything. ...