I am trying to build this circuit which requires two SPCO switch that go between two voltage values but I only have access to 4066N SPST switches. I am not sure if there are better alternative ...
I am currently devising ways to shut off different circuit sections in an embedded circuit. Here is a breakdown of what I am doing and my initial idea. Currently I have a micro controller which is ...
The following circuit is an active current to voltage converter with switchable gain. Schematic Not shown: The inverting input is held low through a 10K resistor when the circuit is powered on but ...
Given the following circuit: What is the component / circuit I should be using to switch the signal between each of the gain resistors? (the ⊠s in the schematic) The inputs ID0 to ID2 are TTL ...
The title pretty much says it all. I have an idea to try out involving a op-amp differentiator circuit and a diode bridge, but I am flying blind. Also I am trying to accomplish this without a ...