I have a TTC103 NTC thermistor. It has zero-power resistance of 10 kΩ at 25°C and B25/50 value of 4050. How do I use it to measure temperature?
I want to compare a PTC thermistor to a set point, and trigger a relay if the temperature goes below a set temperature. In particular, my temperature to turn on the relay should be 33 degrees F (845 ...
I'm working on a board that takes measurements of voltage off a thermistor through an Arduino and amplified by an opamp (really an instrumentation amp AD623), also there are two potentiometers. See ...
I was thinking about buying a thermistor and a RGB LED and thereby be able to change the light of the LED, but I'm confused by the resistances I see on eBay. I see some of 100 ohm, 10k ohm and 100k ...
I just started writing a program that represents the temperature of an NTC TT102 thermistor. First I tried the famous voltage divider, but I soon found that it is not good. So I decided to uses the ...