For an art project I am trying to design a system for controlling several badges. The basic design I am thinking of is like this: a XBee connected to a miniarduino that is conected to both a LDR ...
I am using MiWi Pro wireless networking protocol and I was running some tests with unicast function, but I encountered a problem. Unicast Main Issue: The end device doesn't receive the messages from ...
I've to implement a wireless communication system. Details are as follows. Range is about 600m Point-to-point communication No LoS is available. (but not highly obstructed) Won't need much higher ...
MC1>XB1 ==> XB2>MC2,MC3,MCn What I am looking to do is control large LED panels, wirelessly, with control of each LED pixel. My concern is the processing limitations of a single controller and/or the ...
I'm working on a control system for my school's tropical greenhouse based on the Arduino. It'll just do basic logging things, along with allowing someone to selectively water sections of the ...
I was working on a project recently and it was the first one which was involved enough to make the sensor networking complicated. In the end, I think the communication was the bottleneck in terms of ...