A tag is a keyword or label that categorizes your question with other, similar questions. Using the right tags makes it easier for others to find and answer your question.

Type to find tags:
× 13
an 8-bit microprocessor designed by Zilog. It powers the popular ZX Spectrum computer.
× 13 × 13
Clearance denotes the shortest distance between two conductive parts as measured through the air.
× 13
Bill Of Materials: The list of components for an assembly. All of the individual parts that go into the manufacturing of a final or sub-assembly.
× 13
a frequency boundary in a system's frequency response at which the power level is greater or less than a given fixed value.
× 13 × 13
the process of managing the rate of data transmission between two nodes
× 13
× 13
Frequency Shift Keying - A digital transmission technique in which a "1" is represented by one frequency and a ")" by another. It is the digital equivalent of FM.
× 13 × 13
For question looking for reference (books, articles, online-resources) for a specific topic or application.
× 13
× 13
Quartus (and in particular Quartus II since the original Quartus is no longer used) is a programmable logic device design software from Altera.
× 13
related to helicopters propelled by four rotors
× 13 × 13
A flexible, transparent, fine fibre made of extruded silica to function as a wave guide to transmitting signals through light
× 13 × 13 × 13
The processes of completely containing a PCB or entire electronic device in a compound designed to protect it from vibration, moisture, etc.
× 13
unrelated to the bidirectional I²C bus. I²S is a media-specific protocol which uses at least three signals: Bit CLK, Word CLK, and at least one data line.
× 13 × 12 × 12 × 12
× 12
Compiler and IDE for Microchip PIC microcontrollers. Compiler is published by Custom Computer Services, Inc. (abbreviated to CCS in PIC circles). **Not to be confused** with Code Composer Studio p…
× 12
Capacitance that arises from the physical layout of the circuit and the placement of components. Particularly notable when the addition of capacitance is undesirable.
× 12 × 12
× 12
Electronics circuits design for guitar pedals
× 12 × 12
an IDE. It contains a base workspace and an extensible plug-in system for customizing the environment.
× 12
Components which provide a gain in the circuit where they are applied. Typical examples are transistors and op-amps.
× 12
Electrical generators that produce alternate current.
× 12
The term "copper pour" refers to an area on a printed circuit board filled with copper
× 12 × 12