network profile
| bio | website | |
|---|---|---|
| location | ||
| age | ||
| visits | member for | 1 year, 4 months |
| seen | 14 hours ago | |
| stats | profile views | 76 |
|
14h |
answered | Passing Parameter on ATMEGA128? |
|
23h |
comment |
Passing Parameter on ATMEGA128? Please check again the updated code, thanks |
|
23h |
revised |
Passing Parameter on ATMEGA128? added 3009 characters in body |
|
May 15 |
comment |
Passing Parameter on ATMEGA128? Please have a look on the latest code... |
|
May 15 |
revised |
Passing Parameter on ATMEGA128? added 93 characters in body |
|
May 13 |
asked | PCI with EP2C8Q208 testbench? |
|
May 13 |
comment |
Passing Parameter on ATMEGA128? So far it's not working as expected, what do I miss here ? |
|
May 11 |
revised |
Passing Parameter on ATMEGA128? added 466 characters in body |
|
May 11 |
comment |
Passing Parameter on ATMEGA128? so: void lcd_data(unsigned char data1) { lcd_data_pin = data1 & 0xF0;; lcd_control(2); lcd_data_pin = (data1<< 4) & 0xF0; lcd_control(2); } void lcd_cmd(unsigned char cmd){ lcd_data_pin = cmd & 0xF0; lcd_control(1); lcd_data_pin = (cmd << 4) & 0xF0; lcd_control(1); } |
|
May 11 |
comment |
Passing Parameter on ATMEGA128? so I'll replace : lcd_data_pin = data_cmd; with : lcd_data_pin = cmd & 0x0f; // send the low four bits then lcd_data_pin = (cmd >> 4) & 0x0f; , is that what you mean ? thanks |
|
May 10 |
revised |
Passing Parameter on ATMEGA128? added 2234 characters in body |
|
May 8 |
asked | Passing Parameter on ATMEGA128? |
|
May 7 |
awarded | Supporter |
|
May 7 |
accepted | Power supply from PCI connector pin B25 or B5 |
|
May 7 |
comment |
Power supply from PCI connector pin B25 or B5 The FPGA is cyclone II, EP2C8Q208CN |
|
May 7 |
awarded | Popular Question |
|
May 6 |
asked | Power supply from PCI connector pin B25 or B5 |
|
Apr 25 |
asked | what's the best track size for PCI card and 256 pin QFP chip? |
|
Jan 15 |
awarded | Popular Question |
|
Jan 5 |
awarded | Yearling |
