26
\$\begingroup\$

I just bought an HDMI repeater and had connectivity issues until I realized the repeater had to know the cable length. It has (1,2,4,8) dip switches that you have to use (binary coded) to set the cable length.

What I'm wondering is: How is the cable length important? If it was just a question of power/loss over the cable, wouldn't the stronger setting always be the best? I assume that since the length is required it either has to do with capacity or signal echo bouncing back the cable end.

Technical details would be enlighting.

\$\endgroup\$
2
  • 8
    \$\begingroup\$ Might be a setting for pre emphasis \$\endgroup\$
    – PlasmaHH
    Nov 27, 2017 at 16:31
  • 1
    \$\begingroup\$ Even if it was just a matter of simple signal amplification, then signal too strong would overdrive the receiver, which is never good. \$\endgroup\$
    – Agent_L
    Nov 28, 2017 at 14:36

1 Answer 1

42
\$\begingroup\$

Some repeaters have a model for the frequency-dependant characteristics of the cable (which varies with length), and pre-emphasize the signal in the output driver to compensate for those characteristics so that the signal at the far end comes closer to the ideal waveform. Such a driver can drive a longer length of cable than an uncompensated driver can.

\$\endgroup\$

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.