Timeline for SIM900 Error on AT Command AT+SAPBR=1,1
Current License: CC BY-SA 3.0
6 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Mar 4, 2015 at 11:23 | comment | added | Ayla kumar | I think it gives error only in the case of already being connected,and again we are attempting to connect,once power it down and on and execute the above commands sequentially,surely this works.. | |
| Feb 27, 2015 at 14:20 | comment | added | user68781 | On error, I suceed to close the bearer first AT+SAPBR=0,1 and then open it again AT+SAPBR=1,1. | |
| Feb 20, 2015 at 14:44 | comment | added | Sergio | Thanks for the reply, but I'm not sure I follow. You mean the device must be power cycled every time? Could you please clarify what do you mean by "actually when once AT+SAPBR=1,1 is executed it automatically connected so again when executed this command it automatically replies error"? Thanks! | |
| Feb 20, 2015 at 11:09 | review | Late answers | |||
| Feb 20, 2015 at 14:41 | |||||
| Feb 20, 2015 at 10:54 | review | First posts | |||
| Feb 20, 2015 at 16:10 | |||||
| Feb 20, 2015 at 10:49 | history | answered | Ayla kumar | CC BY-SA 3.0 |