Timeline for I2C -internal and external pull up
Current License: CC BY-SA 3.0
9 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Jul 1, 2015 at 16:51 | comment | added | Funkyguy | @AksharaPrasad Interesting, could you tell us which one it is though? It may be possible that you aren't looking in the right places. Regardless, if my answer helped, feel free to upvote :) | |
| Jul 1, 2015 at 16:49 | comment | added | Akshara Prasad | I know no one will not steal my idea. But the manual is not present in internet. | |
| Jul 1, 2015 at 16:40 | comment | added | Funkyguy | @AksharaPrasad That doesn't help in the slightest. Specifically which one? Then I can look through it myself. Nobody is going to steal your idea. | |
| Jul 1, 2015 at 16:38 | comment | added | Funkyguy | What controller are you targeting? This is the kind of information that you would put in the original question. | |
| Jul 1, 2015 at 16:38 | comment | added | Akshara Prasad | I went through the datasheet .. But couldnt find the internal pull up value. | |
| Jul 1, 2015 at 16:36 | history | edited | Funkyguy | CC BY-SA 3.0 |
added 160 characters in body
|
| Jul 1, 2015 at 16:35 | comment | added | Funkyguy | What is the value on the internal pull-up? Remember that if you put both pull-ups on, the total resistance will be lower, possibly falling below the required strength. | |
| Jul 1, 2015 at 16:34 | comment | added | Akshara Prasad | I can disable the internal pull up. But why I asked this because, earlier when I was working with internal pull up disabled, the data in the data line was observed different when i worked with both pull ups enabled. Even if I use internal pull I was able to do I2C communication. | |
| Jul 1, 2015 at 16:29 | history | answered | Funkyguy | CC BY-SA 3.0 |