3 ...the eBay links can go bad: added the name of the example board suggested in the link so not getting lost. Thank you Leon Heller!
source | link

Cheapest entry point is probably one of these Cyclone II boards, the example is Altera Cyclone II EP2C5T144 FPGA Mini Development Board. You will need a JTAG interface which you can get from the same supplier. You will need the free Quartus II tools which can be downloaded from the Altera web site and support VHDL, Verilog, and schematic entry. I have one of those boards and it works very well. External circuitry has to be added via PCBs that are interfaced via one or more of the headers. I created this web page to help users get started with it.

Another board I have is this one from Digilent, which can be used with the free ISE software available from Xilinx. A JTAG cable is also needed with that board. This board is easier to use because plenty of examples are available.

Cheapest entry point is probably one of these Cyclone II boards. You will need a JTAG interface which you can get from the same supplier. You will need the free Quartus II tools which can be downloaded from the Altera web site and support VHDL, Verilog, and schematic entry. I have one of those boards and it works very well. External circuitry has to be added via PCBs that are interfaced via one or more of the headers. I created this web page to help users get started with it.

Another board I have is this one from Digilent, which can be used with the free ISE software available from Xilinx. A JTAG cable is also needed with that board. This board is easier to use because plenty of examples are available.

Cheapest entry point is probably one of these Cyclone II boards, the example is Altera Cyclone II EP2C5T144 FPGA Mini Development Board. You will need a JTAG interface which you can get from the same supplier. You will need the free Quartus II tools which can be downloaded from the Altera web site and support VHDL, Verilog, and schematic entry. I have one of those boards and it works very well. External circuitry has to be added via PCBs that are interfaced via one or more of the headers. I created this web page to help users get started with it.

Another board I have is this one from Digilent, which can be used with the free ISE software available from Xilinx. A JTAG cable is also needed with that board. This board is easier to use because plenty of examples are available.

2 added 192 characters in body
source | link

Cheapest entry point is probably one of these Cyclone II boards. You will need a JTAG interface which you can get from the same supplier. You will need the free Quartus II tools which can be downloaded from the Altera web site. Quartus II supports and support VHDL, Verilog, and schematic entry. I have one of those boards and it works very well. External circuitry has to be added via PCBs that are interfaced via one or more of the headers. I created this web page to help users get started with it. 

Another board I have is this one from Digilent, which can be used with the free ISE software available from Xilinx. A JTAG cable is also needed with that board. This board is easier to use because plenty of examples are available.

Cheapest entry point is probably one of these Cyclone II boards. You will need a JTAG interface which you can get from the same supplier. You will need the free Quartus II tools which can be downloaded from the Altera web site. Quartus II supports VHDL, Verilog, and schematic entry. I have one of those boards and it works very well. External circuitry has to be added via PCBs that are interfaced via one or more of the headers. Another board I have is this one from Digilent, which can be used with the free ISE software available from Xilinx. A JTAG cable is also needed with that board.

Cheapest entry point is probably one of these Cyclone II boards. You will need a JTAG interface which you can get from the same supplier. You will need the free Quartus II tools which can be downloaded from the Altera web site and support VHDL, Verilog, and schematic entry. I have one of those boards and it works very well. External circuitry has to be added via PCBs that are interfaced via one or more of the headers. I created this web page to help users get started with it. 

Another board I have is this one from Digilent, which can be used with the free ISE software available from Xilinx. A JTAG cable is also needed with that board. This board is easier to use because plenty of examples are available.

1
source | link

Cheapest entry point is probably one of these Cyclone II boards. You will need a JTAG interface which you can get from the same supplier. You will need the free Quartus II tools which can be downloaded from the Altera web site. Quartus II supports VHDL, Verilog, and schematic entry. I have one of those boards and it works very well. External circuitry has to be added via PCBs that are interfaced via one or more of the headers. Another board I have is this one from Digilent, which can be used with the free ISE software available from Xilinx. A JTAG cable is also needed with that board.