4 replaced http://electronics.stackexchange.com/ with https://electronics.stackexchange.com/
source | link

This is a follow up question of my previous questionquestion. I've done this board using AutoCAD and exported to DXF.

enter image description here

After that I used Altium designer to import the DXF file in which the outline turned out as shown in this pic.

enter image description here

Now I need to modify the outline to get the actual PCB board like this:

enter image description here

I have tried adding the polygon pour using full circle, arcs,lines but its pouring the copper all over including the gap tracks. So I'm confused and struggling to find a proper way to do this. Please help me guys.

This is a follow up question of my previous question. I've done this board using AutoCAD and exported to DXF.

enter image description here

After that I used Altium designer to import the DXF file in which the outline turned out as shown in this pic.

enter image description here

Now I need to modify the outline to get the actual PCB board like this:

enter image description here

I have tried adding the polygon pour using full circle, arcs,lines but its pouring the copper all over including the gap tracks. So I'm confused and struggling to find a proper way to do this. Please help me guys.

This is a follow up question of my previous question. I've done this board using AutoCAD and exported to DXF.

enter image description here

After that I used Altium designer to import the DXF file in which the outline turned out as shown in this pic.

enter image description here

Now I need to modify the outline to get the actual PCB board like this:

enter image description here

I have tried adding the polygon pour using full circle, arcs,lines but its pouring the copper all over including the gap tracks. So I'm confused and struggling to find a proper way to do this. Please help me guys.

    Tweeted twitter.com/StackElectronix/status/689453222361042944
3 edited body
source | link

This is a follow up question of my previous question. I've done this board using AutoCAD and exported to DXF.

enter image description hereenter image description here

After that I used Altium designer to import the DXF file in which the outline turned out as shown in this pic.

enter image description hereenter image description here

Now I need to modify the outline to get the actual PCB board like this:

enter image description hereenter image description here

I have tried adding the polygon pour using full circle, arcs,lines but its pouring the copper all over including the gap tracks. So I'm confused and struggling to find a proper way to do this. Please help me guys.

This is a follow up question of my previous question. I've done this board using AutoCAD and exported to DXF.

enter image description here

After that I used Altium designer to import the DXF file in which the outline turned out as shown in this pic.

enter image description here

Now I need to modify the outline to get the actual PCB board like this:

enter image description here

I have tried adding the polygon pour using full circle, arcs,lines but its pouring the copper all over including the gap tracks. So I'm confused and struggling to find a proper way to do this. Please help me guys.

This is a follow up question of my previous question. I've done this board using AutoCAD and exported to DXF.

enter image description here

After that I used Altium designer to import the DXF file in which the outline turned out as shown in this pic.

enter image description here

Now I need to modify the outline to get the actual PCB board like this:

enter image description here

I have tried adding the polygon pour using full circle, arcs,lines but its pouring the copper all over including the gap tracks. So I'm confused and struggling to find a proper way to do this. Please help me guys.

2 embedding images
source | link

This is a follow up question of my previous question. I've done this boardthis board using AutoCAD and exported to DXF.

enter image description here

After that I used Altium designer to import the DXF file in which the outline turned out as shown in this picpic.Now

enter image description here

Now I need to modify the outline to get the actual PCB board like this,like this:

enter image description here

I have tried adding the polygon pour using full circle, arcs,lines but its pouring the copper all over including the gap tracks. So I'm confused and struggling to find a proper way to do this. Please help me guys.

This is a follow up question of my previous question. I've done this board using AutoCAD and exported to DXF. After that I used Altium designer to import the DXF file in which the outline turned out as shown in this pic.Now I need to modify the outline to get the actual PCB board like this, I have tried adding the polygon pour using full circle, arcs,lines but its pouring the copper all over including the gap tracks. So I'm confused and struggling to find a proper way to do this. Please help me guys.

This is a follow up question of my previous question. I've done this board using AutoCAD and exported to DXF.

enter image description here

After that I used Altium designer to import the DXF file in which the outline turned out as shown in this pic.

enter image description here

Now I need to modify the outline to get the actual PCB board like this:

enter image description here

I have tried adding the polygon pour using full circle, arcs,lines but its pouring the copper all over including the gap tracks. So I'm confused and struggling to find a proper way to do this. Please help me guys.

1
source | link