Timeline for Modular PCB Design
Current License: CC BY-SA 3.0
3 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Nov 17, 2011 at 6:35 | comment | added | Chris Stratton | @Saad - you would have to tell the uC how many boards are present and the built-into-cpld-code or switch-chosen address of each. My premise is that code is cheap but hardware expensive, granted that is not always the case. | |
| Nov 17, 2011 at 6:01 | comment | added | Saad | Chris, how would the uC know the address that's on each dip switch? The CPLD would power and read from the DIP Switch. This is trivial because they're on the same board, but how would the uC know? | |
| Nov 17, 2011 at 5:45 | history | answered | Chris Stratton | CC BY-SA 3.0 |