Timeline for Solar Motor Circuit Design
Current License: CC BY-SA 3.0
9 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Nov 24, 2017 at 9:14 | answer | added | dan | timeline score: 0 | |
| Jun 13, 2016 at 14:57 | vote | accept | Jonathan Pereira | ||
| Mar 26, 2016 at 19:09 | answer | added | user80875 | timeline score: 2 | |
| Mar 26, 2016 at 14:45 | comment | added | slightlynybbled | And you shouldn't need a resistor... that just burns power. | |
| Mar 26, 2016 at 10:49 | comment | added | seetharaman | 2 things: 1) By connecting the panel to your motor, you won't be operating at Voc(open circuit voltage), nor you can expect Isc(short circuit current). - solution: check the data sheet of the panel, you will find some graphs called as VI characteristics, it will give you some idea. 2) you are using a solar panel, which clearly is not a battery, it's output power will vary based on irradiance and temperature, so you won't be getting a constant voltage or current, make sure you are operating within the absolute maximum ratings of your motor. | |
| Mar 26, 2016 at 9:28 | history | edited | Neil_UK | CC BY-SA 3.0 |
spelling
|
| Mar 26, 2016 at 9:20 | comment | added | Transistor | What you are doing wrong is thinking that you can have maximum voltage and maximum current at the same time. You need to look at the voltage - current curve for your panel and figure out the relationship. | |
| Mar 26, 2016 at 9:15 | review | First posts | |||
| Mar 26, 2016 at 12:22 | |||||
| Mar 26, 2016 at 9:11 | history | asked | Jonathan Pereira | CC BY-SA 3.0 |