Return to Question

I am trying to connect together

1. PID Controller (ALTEC PC410, Output Relay (NO, max. 250VAC, 3A))
2. K-type thermocouple
3. SSR (uxcell SSR-25 DA 25A 3-32V DC / 24-380V AC Solid State Relay + Heat Sink)

Question Do I connect

1. SSR Input Pins 3 and 4 to the PC410 OUT1 pins 4 and 5?
2. 110VAC L to PC410 pin 1 and SSR Output pin 1
3. 110VAC 'N' to PC410 pin 2 and one end of Load
4. SSR Output pin 2 to the other end of Load

Proposed Wiring Diagram

On the SSR, top 2 pins are labelled LOAD, bottom 2 pins INPUT

I am trying to connect together

1. PID Controller (ALTEC PC410, Output Relay (NO, max. 250VAC, 3A))
2. K-type thermocouple
3. SSR (uxcell SSR-25 DA 25A 3-32V DC / 24-380V AC Solid State Relay + Heat Sink)

Question Do I connect

1. SSR Input Pins 3 and 4 to the PC410 OUT1 pins 4 and 5?
2. 110VAC L to PC410 pin 1 and SSR Output pin 1
3. 110VAC 'N' to PC410 pin 2 and one end of Load
4. SSR Output pin 2 to the other end of Load

Proposed Wiring Diagram

On the SSR, top 2 pins are labelled LOAD, bottom 2 pins INPUT

I am trying to connect together

1. PID Controller (ALTEC PC410, Output Relay (NO, max. 250VAC, 3A))
2. K-type thermocouple
3. SSR (uxcell SSR-25 DA 25A 3-32V DC / 24-380V AC Solid State Relay + Heat Sink)

Question Do I connect

1. SSR Input Pins 3 and 4 to the PC410 OUT1 pins 4 and 5?
2. 110VAC L to PC410 pin 1 and SSR Output pin 1
3. 110VAC 'N' to PC410 pin 2 and one end of Load
4. SSR Output pin 2 to the other end of Load

Proposed Wiring Diagram

I am trying to connect together

1. PID Controller (ALTEC PC410, Output Relay (NO, max. 250VAC, 3A))
2. K-type thermocouple
3. SSR (uxcell SSR-25 DA 25A 3-32V DC / 24-380V AC Solid State Relay + Heat Sink)

Question Do I connect

1. SSR Input Pins 3 and 4 to the PC410 OUT1 pins 4 and 5?
2. 110VAC L to PC410 pin 1 and SSR Output pin 1
3. 110VAC 'N' to PC410 pin 2 and one end of Load
4. SSR Output pin 2 to the other end of Load

Proposed Wiring Diagram

On the SSR, top 2 pins are labelled LOAD, bottom 2 pins INPUT

I am trying to connect together

1. PID Controller (ALTEC PC410, Output Relay (NO, max. 250VAC, 3A))
2. K-type thermocouple
3. SSR (uxcell SSR-25 DA 25A 3-32V DC / 24-380V AC Solid State Relay + Heat Sink)

Question Do I connect

1. SSR Input Pins 3 and 4 to the PC410 OUT1 pins 4 and 5?
2. 110VAC L to PC410 pin 1 and SSR Output pin 1
3. 110VAC 'N' to PC410 pin 2 and one end of Load
4. SSR Output pin 2 to the other end of Load

PC410 Pinout

SSR

I am trying to connect together

1. PID Controller (ALTEC PC410, Output Relay (NO, max. 250VAC, 3A))
2. K-type thermocouple
3. SSR (uxcell SSR-25 DA 25A 3-32V DC / 24-380V AC Solid State Relay + Heat Sink)

Question Do I connect

1. SSR Input Pins 3 and 4 to the PC410 OUT1 pins 4 and 5?
2. 110VAC L to PC410 pin 1 and SSR Output pin 1
3. 110VAC 'N' to PC410 pin 2 and one end of Load
4. SSR Output pin 2 to the other end of Load

Proposed Wiring Diagram