Timeline for PCB "Touch" Button
Current License: CC BY-SA 3.0
10 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Jul 29 at 15:30 | comment | added | MicroservicesOnDDD | No... He's talking about resistive sensing. | |
| Jan 26, 2017 at 10:09 | history | edited | mxcd | CC BY-SA 3.0 |
deleted 3 characters in body
|
| Jan 26, 2017 at 10:07 | vote | accept | mxcd | ||
| Jan 23, 2017 at 16:59 | history | tweeted | twitter.com/StackElectronix/status/823575964261253120 | ||
| Jan 23, 2017 at 12:50 | answer | added | Olin Lathrop | timeline score: 14 | |
| Jan 23, 2017 at 11:49 | answer | added | Douwe66 | timeline score: 14 | |
| Jan 23, 2017 at 10:40 | comment | added | Vladimir Cravero | Depending on the power requirements of your design, capacitive sensing might be too power hungry. You can get away with the 50Hz (probably). If you touch the gate of a mos, you turn the mos on. Also, you usually break it, so it must be somehow protected, but it is a good starting point. | |
| Jan 23, 2017 at 10:38 | comment | added | mxcd | @PlasmaHH This might be another possibility, but I though of something like amplifying the current that flows when bridging the above pad with your finger, unsing it to operate a mosfet or something | |
| Jan 23, 2017 at 10:25 | comment | added | PlasmaHH | You mean a capacitive touch sensor? | |
| Jan 23, 2017 at 10:21 | history | asked | mxcd | CC BY-SA 3.0 |