Timeline for Using somesort of a switch between 230V AC and 24V DC
Current License: CC BY-SA 3.0
7 events
when toggle format | what | by | license | comment | |
---|---|---|---|---|---|
Jul 20 at 2:19 | comment | added | Greenonline | This does not provide an answer to the question. Once you have sufficient reputation you will be able to comment on any post; instead, provide answers that don't require clarification from the asker. - From Review | |
Jul 20 at 1:02 | comment | converted from answer | david schwartz | i beleave he wants a 24vac switch that when activated from control panel would switch 240v power suppy on to start 240v device..ie motor or pump | |
Jan 26, 2017 at 21:33 | comment | added | MarkU | Somewhat related answer: using test fixtures to manage high voltage and low voltage supplies. electronics.stackexchange.com/a/209211/35022 | |
Jan 26, 2017 at 19:26 | comment | added | RunoTheDog | People can't get hurt, since the power is switched on after the test is started and fuses are used in suitable places. The test device can burn only in 1/n times, since there is only one device, which needs the 24DC. I'd like to have this switch to avoid building up a redundant setup. | |
Jan 26, 2017 at 19:19 | review | First posts | |||
Jan 26, 2017 at 20:40 | |||||
Jan 26, 2017 at 19:17 | comment | added | Eugene Sh. | I would really not recommend doing this. What if you forget to switch? It will burn your stuff in the best case or kill people in the worst. | |
Jan 26, 2017 at 19:15 | history | asked | RunoTheDog | CC BY-SA 3.0 |