Timeline for How to design for a spectrum analyzer analysis?
Current License: CC BY-SA 3.0
15 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Jun 26, 2017 at 17:24 | vote | accept | Reid | ||
| Jun 25, 2017 at 4:24 | history | edited | D.A.S. | CC BY-SA 3.0 |
added 870 characters in body
|
| Jun 25, 2017 at 3:06 | comment | added | D.A.S. | Agilent was HP and is now Keysight (FYI) | |
| Jun 25, 2017 at 2:59 | history | edited | D.A.S. | CC BY-SA 3.0 |
added 102 characters in body
|
| Jun 25, 2017 at 2:51 | history | edited | D.A.S. | CC BY-SA 3.0 |
added 181 characters in body
|
| Jun 25, 2017 at 2:46 | comment | added | D.A.S. | start reading siglent.com/ENs/… | |
| Jun 25, 2017 at 2:44 | comment | added | D.A.S. | accessories siglent.com/ENs/… | |
| Jun 25, 2017 at 2:29 | comment | added | D.A.S. | I hope you got a calibration kit and tracking gen options.. you have lots to learn about calibrations.. and how to use ..not hard but necessary look for how to from Agilent and other sources.. saelig.com/product/rbssa3x20.htm this is a directional coupler built to precision mechanics ... like 0.01% tolerances thus expensive. But you might read on how to do it cheap with gen to antenna out and another antenna or 1/4W wire to input. then insert filter but you need adapters rated for >3GHz from U.FL to SMA to N(male) Pasternack cables probably ok for 2Ghz,cheap ,poor for 10GHz | |
| Jun 25, 2017 at 2:07 | comment | added | Reid | Also, not sure if it matters, I have the SSA3021X on order as my spectrum analyzer. | |
| Jun 25, 2017 at 2:04 | comment | added | Reid | Okay just to make sure I am understanding (Thank you so much for working with me here!), there is only one wire going to the DUT, and I should put that wire where I would plug in the antenna. | |
| Jun 25, 2017 at 2:00 | comment | added | WhatRoughBeast | You are new. DUT means "Device Under Test". | |
| Jun 25, 2017 at 1:59 | comment | added | D.A.S. | Device under test (DUT) are U using good quality U.FL to SMA adapters for Analyzer? SMA splitters are easy to find on search engine | |
| Jun 25, 2017 at 1:57 | history | edited | D.A.S. | CC BY-SA 3.0 |
added 309 characters in body
|
| Jun 25, 2017 at 1:55 | comment | added | Reid | I am sorry, but I have no clue what your answer means. I am very new to RF. Could you please explain a bit more. What would an actual test setup look like with a spectrum analyzer and tracking generator? Also what is a DUT? | |
| Jun 25, 2017 at 1:54 | history | answered | D.A.S. | CC BY-SA 3.0 |