Timeline for Spring PCB terminal block for stranded wire
Current License: CC BY-SA 3.0
7 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Jul 28, 2017 at 12:03 | vote | accept | Whiskeyjack | ||
| Jul 28, 2017 at 11:56 | comment | added | Chris Knudsen | Much of what I do is to come up with ways to produce assemblies faster, cheaper, and more reliably. Ferrules help in this regard in that they keep all of the strands together, preventing shorts. It also makes inspection and reconfiguration much more reliable. I would suggest: One ferrule per spring clamp. If you need 2 wires, put 2 wires in the ferrule and crimp. The reliability of the spring clamp should be a function of the clamp manufacturer, not the presence of the ferrule. We use them often, and are very pleased. Investigate the terminal block quality, and go from there. | |
| S Jul 28, 2017 at 10:53 | history | suggested | Sachin | CC BY-SA 3.0 |
Fixed spelling
|
| Jul 28, 2017 at 10:45 | review | Suggested edits | |||
| S Jul 28, 2017 at 10:53 | |||||
| Jul 28, 2017 at 10:31 | comment | added | S.G | you mean because of the plastic insulator? normally it is flexible and it will give in, so it is no big deal | |
| Jul 28, 2017 at 9:48 | comment | added | Whiskeyjack | Placing the ferrule crimped wire seemed to be the only problem because they essentially increase the wire's neck dia. Placing two wires adjacent to each other will be a pain if I put ferrules on them. | |
| Jul 28, 2017 at 9:45 | history | answered | S.G | CC BY-SA 3.0 |