Bumped by Community user
    Bumped by Community user
3 Please use a spell checker when posting, and ask a clear specific qeustion
source | link

I am new in the Xbee world, I have 4 Xbee S1 802.15.4, that 3 are end device and one a coordinator.

The end devices transmit good to coordinator.The coordinator is conectconnect to Raspberry Pi via USB with a Xbee USB Explorer. The comunicationcommunication is through serial and can see the data for the end devices, use python.But how

How can send a signal from the coordinator to each end device for wait to start the transmission.?

In this moment I have the configuration in API Mode.

Thank you

I am new in the Xbee world, I have 4 Xbee S1 802.15.4, that 3 are end device and one a coordinator.

The end devices transmit good to coordinator.The coordinator is conect to Raspberry Pi via USB with a Xbee USB Explorer. The comunication is through serial and can see the data for the end devices, use python.But how can send a signal from the coordinator to each end device for wait to start the transmission.

In this moment I have the configuration in API Mode.

Thank you

I am new in the Xbee world, I have 4 Xbee S1 802.15.4, that 3 are end device and one a coordinator.

The end devices transmit good to coordinator.The coordinator is connect to Raspberry Pi via USB with a Xbee USB Explorer. The communication is through serial and can see the data for the end devices, use python.

How can send a signal from the coordinator to each end device for wait to start the transmission?

In this moment I have the configuration in API Mode.

2 added 1 character in body
source | link

I am new in the Xbee world, I have 4 Xbee S1 802.15.4, that 3 are end device and one a coordinator.

The end devices transmit good to coordinator.The coordinator is conect to Raspberry Pi via USB with a Xbee USB Explorer. The comunication is through serial and can see the data for the end devices, use python.But how can send a signal from the coordinator to each end device for wait to start the transmitiontransmission.

In this moment I have the configuration in API Mode.

Thank you

I am new in the Xbee world, I have 4 Xbee S1 802.15.4, that 3 are end device and one a coordinator.

The end devices transmit good to coordinator.The coordinator is conect to Raspberry Pi via USB with a Xbee USB Explorer. The comunication is through serial and can see the data for the end devices, use python.But how can send a signal from the coordinator to each end device for wait to start the transmition.

In this moment I have the configuration in API Mode.

Thank you

I am new in the Xbee world, I have 4 Xbee S1 802.15.4, that 3 are end device and one a coordinator.

The end devices transmit good to coordinator.The coordinator is conect to Raspberry Pi via USB with a Xbee USB Explorer. The comunication is through serial and can see the data for the end devices, use python.But how can send a signal from the coordinator to each end device for wait to start the transmission.

In this moment I have the configuration in API Mode.

Thank you

1
source | link

Comunication Xbee S1 Coordinator to End Device

I am new in the Xbee world, I have 4 Xbee S1 802.15.4, that 3 are end device and one a coordinator.

The end devices transmit good to coordinator.The coordinator is conect to Raspberry Pi via USB with a Xbee USB Explorer. The comunication is through serial and can see the data for the end devices, use python.But how can send a signal from the coordinator to each end device for wait to start the transmition.

In this moment I have the configuration in API Mode.

Thank you