Timeline for What are these values on this capacitor?
Current License: CC BY-SA 3.0
20 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Jun 3, 2019 at 20:02 | history | bumped | CommunityBot | This question has answers that may be good or bad; the system has marked it active so that they can be reviewed. | |
| Feb 2, 2019 at 10:02 | history | bumped | CommunityBot | This question has answers that may be good or bad; the system has marked it active so that they can be reviewed. | |
| Nov 5, 2017 at 1:06 | comment | added | Trevor_G | google smt electrolytic capacitor then click on images. You will see both kinds ( and a lot of other crap) Good luck with the repair though/ | |
| Nov 5, 2017 at 1:01 | comment | added | user167924 | Well, I'll take your word for it. I don't know much about hardware. But I'll replace it anyways, it's cheap and easy. | |
| Nov 5, 2017 at 1:00 | comment | added | Trevor_G | The inductor beneath it looks like it has been cooking though | |
| Nov 5, 2017 at 0:59 | comment | added | Trevor_G | Daniel it depends on the cap, some are printed right on the metal, others have a shrink wrap film on them. that's the seam lines you are seeing. | |
| Nov 5, 2017 at 0:58 | comment | added | user167924 | Not on these capacitors. Because these are layered with a plastic cap, you can't see the marking because it is underneath. If you look on the first image, there is a similar capacitor without the marking. Furthermore, the markings are inwards, not outwards like this capacitor. Which leads me to believe it's swollen | |
| Nov 5, 2017 at 0:55 | comment | added | Trevor_G | Daniel that is a normal marking on those devices... bing.com/images/… It's part of the manufacturing process | |
| Nov 5, 2017 at 0:51 | comment | added | user167924 | It's swollen, you can see the "x" mark on top of it aswell. | |
| Nov 5, 2017 at 0:48 | comment | added | Trevor_G | "As you can see from the images, this capacitor needs replacement" you can? what makes you think that? | |
| Nov 5, 2017 at 0:41 | answer | added | Jogitech | timeline score: 1 | |
| Nov 5, 2017 at 0:41 | comment | added | Janka | SMT = Surface mounted technology. SMD = Surface mounted device. It's the same. | |
| Nov 5, 2017 at 0:40 | comment | added | user167924 | Do you mean SMD? @Jan Dorniak | |
| Nov 5, 2017 at 0:39 | comment | added | Dave Tweed | Furthermore, it's a surface-mount capacitor. The tips of the leads that you see on the component side of the board are a very small part of what is soldered. To properly replace it, you need to be able to heat the board from both sides in an SMT rework station. | |
| Nov 5, 2017 at 0:39 | comment | added | Janka | You simply desolder the leads . They are actually square-shaped wires which lead under the can horizontally, so desoldering can be a bit tricky. The support belongs to the part, you remove it along with the can. | |
| Nov 5, 2017 at 0:38 | comment | added | jaskij | I cant help you with values but the case is a typical SMT electrolityc cap | |
| Nov 5, 2017 at 0:37 | comment | added | Janka | That's a 33µF, 100V cap. The 32aJ marking denotes the type as specified in the factory. You have to consult the datasheet to find out what it means. It does not mean Joule. | |
| Nov 5, 2017 at 0:32 | review | First posts | |||
| Nov 5, 2017 at 2:36 | |||||
| Nov 5, 2017 at 0:32 | history | edited | Dave Tweed | CC BY-SA 3.0 |
put images inline
|
| Nov 5, 2017 at 0:29 | history | asked | user167924 | CC BY-SA 3.0 |