2 Remove dead/spam links
source | link

It all depends on your project. If you are in your garage working on a small project I don't think it is a big deal. We have worked on some pretty large projects in the past and hire out to have wire pre-cut and stripped for us. We tried a lot of techniques when we first started.. tools, cutting, burning, etc... and it was just too time consuming. When we used several tools the wire would always get nicks in it and we needed something cleaner. Check out some of these photos of cutting and stripping machines. They are impressive to see in action. [https://www.wbwireandcable.com/wire-out thousands of exact lengths and specs for wires in just minutes. Best of luck with your project!

It all depends on your project. If you are in your garage working on a small project I don't think it is a big deal. We have worked on some pretty large projects in the past and hire out to have wire pre-cut and stripped for us. We tried a lot of techniques when we first started.. tools, cutting, burning, etc... and it was just too time consuming. When we used several tools the wire would always get nicks in it and we needed something cleaner. Check out some of these photos of cutting and stripping machines. They are impressive to see in action. [https://www.wbwireandcable.com/wire-out thousands of exact lengths and specs for wires in just minutes. Best of luck with your project!

It all depends on your project. If you are in your garage working on a small project I don't think it is a big deal. We have worked on some pretty large projects in the past and hire out to have wire pre-cut and stripped for us. We tried a lot of techniques when we first started.. tools, cutting, burning, etc... and it was just too time consuming. When we used several tools the wire would always get nicks in it and we needed something cleaner.

1
source | link

It all depends on your project. If you are in your garage working on a small project I don't think it is a big deal. We have worked on some pretty large projects in the past and hire out to have wire pre-cut and stripped for us. We tried a lot of techniques when we first started.. tools, cutting, burning, etc... and it was just too time consuming. When we used several tools the wire would always get nicks in it and we needed something cleaner. Check out some of these photos of cutting and stripping machines. They are impressive to see in action. [https://www.wbwireandcable.com/wire-out thousands of exact lengths and specs for wires in just minutes. Best of luck with your project!