Timeline for How to change PIC watch dog expiration duration in run time?
Current License: CC BY-SA 3.0
5 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Jun 11, 2020 at 15:10 | history | edited | CommunityBot |
Commonmark migration
|
|
| Feb 27, 2018 at 13:55 | comment | added | user101095 | In order to switch over from 20 MHz external crystal to 31 KHz internal oscillator, do I need to enable IESO: Internal/External Oscillator Switchover bit in CONFIG1H register? | |
| Feb 27, 2018 at 13:51 | comment | added | user101095 | After using 31 KHz internal oscillator as the primary clock source for timer 1, do I need to put the device in sleep? Would Timer 1 interrupt work with 31 KHz internal oscillator to wake up from sleep? Can I switch over from 20MHz external crystal to internal 31KHz during code execution? What settings would be required for Timer 1 in 31 KHz internal oscillator after switching from 20 MHz, as I use Timer 1 with 20 MHz crystal during rest of the code execution too? | |
| Feb 27, 2018 at 3:36 | comment | added | Bruce Abbott | The 18F25k20 has an internal 31kHz oscillator - any reason you can't use it? | |
| Feb 27, 2018 at 2:48 | history | asked | user101095 | CC BY-SA 3.0 |