Mod Moved Comments To Chat
2 added 136 characters in body
source | link

I have built this circuit

enter image description here

to supply a few ICs. The problem is that at some point in time the load on the positive site is bigger than on the negative side. So the virtual ground moves towards the positive rail drawing current on the negative part, heating the LM337 excessively. Another problem is that this circuit has a huge amount of noise that is not filtered in any way and passes to the remaining circuit. An amplifier being supplied by this will show a huge amount of buzz and hum.

Due to the limitation of space for this project, I cannot have a real symmetrical power supply

I have researched other circuits like this one but all seem to have the same problem of the ground varying and not becoming stable.

Searching deeper I found this circuit using the TLE2426. I do not need huge current needs but 3 things I need and that is a circuit that does not change the ground when I have different loads on the positive or negative sides of it, low noise and with the minimum number of components... and I am not sure this circuit can handle an amplifier using the IC TEA2025B as a load.

Another problem with the power supply on the picture is that when I increase the amplifier volume, the LM337 starts to heating fast.

Is there any way to do a virtual ground that is stable, low noise and with the minimum number of components?

I have built this circuit

enter image description here

to supply a few ICs. The problem is that at some point in time the load on the positive site is bigger than on the negative side. So the virtual ground moves towards the positive rail drawing current on the negative part, heating the LM337 excessively. Another problem is that this circuit has a huge amount of noise that is not filtered in any way and passes to the remaining circuit. An amplifier being supplied by this will show a huge amount of buzz and hum.

Due to the limitation of space for this project, I cannot have a real symmetrical power supply

I have researched other circuits like this one but all seem to have the same problem of the ground varying and not becoming stable.

Searching deeper I found this circuit using the TLE2426. I do not need huge current needs but 3 things I need and that is a circuit that does not change the ground when I have different loads on the positive or negative sides of it, low noise and with the minimum number of components... and I am not sure this circuit can handle an amplifier using the IC TEA2025B as a load.

Is there any way to do a virtual ground that is stable, low noise and with the minimum number of components?

I have built this circuit

enter image description here

to supply a few ICs. The problem is that at some point in time the load on the positive site is bigger than on the negative side. So the virtual ground moves towards the positive rail drawing current on the negative part, heating the LM337 excessively. Another problem is that this circuit has a huge amount of noise that is not filtered in any way and passes to the remaining circuit. An amplifier being supplied by this will show a huge amount of buzz and hum.

Due to the limitation of space for this project, I cannot have a real symmetrical power supply

I have researched other circuits like this one but all seem to have the same problem of the ground varying and not becoming stable.

Searching deeper I found this circuit using the TLE2426. I do not need huge current needs but 3 things I need and that is a circuit that does not change the ground when I have different loads on the positive or negative sides of it, low noise and with the minimum number of components... and I am not sure this circuit can handle an amplifier using the IC TEA2025B as a load.

Another problem with the power supply on the picture is that when I increase the amplifier volume, the LM337 starts to heating fast.

Is there any way to do a virtual ground that is stable, low noise and with the minimum number of components?

1
source | link

Trying to build a symmetrical power supply from a VDC input without the problems of virtual ground

I have built this circuit

enter image description here

to supply a few ICs. The problem is that at some point in time the load on the positive site is bigger than on the negative side. So the virtual ground moves towards the positive rail drawing current on the negative part, heating the LM337 excessively. Another problem is that this circuit has a huge amount of noise that is not filtered in any way and passes to the remaining circuit. An amplifier being supplied by this will show a huge amount of buzz and hum.

Due to the limitation of space for this project, I cannot have a real symmetrical power supply

I have researched other circuits like this one but all seem to have the same problem of the ground varying and not becoming stable.

Searching deeper I found this circuit using the TLE2426. I do not need huge current needs but 3 things I need and that is a circuit that does not change the ground when I have different loads on the positive or negative sides of it, low noise and with the minimum number of components... and I am not sure this circuit can handle an amplifier using the IC TEA2025B as a load.

Is there any way to do a virtual ground that is stable, low noise and with the minimum number of components?