So I am working on a project that I found online at (https://makezine.com/projects/a-touchless-3d-tracking-interface/).

However, instead of using my hand to track, I want to track an aluminum ball with 2cm radius, which is connected to ground. I am also using thin metal aluminum plates instead of the foil. I cannot get the distance that I need, which is about 35cm. My question is, how do I increase the measuring distance of the plate to reach the 35cm at least?

This is the circuit

Looking forward for all suggestions and help!!!

Thanks a lot in advance!

I am working on a 3D tracking interface project that I found online here.

However, instead of using my hand to track, I want to track an aluminum ball with a 2 cm radius, which is connected to ground. I am also using thin metal aluminum plates instead of foil.

I can't get the distance I need, which is about 35 cm. How do I increase the measuring distance of the plate to reach at least 35 cm?

This is the circuit:

So I am working on a project that I found online at (https://makezine.com/projects/a-touchless-3d-tracking-interface/).

However, instead of using my hand to track, I want to track an aluminum ball with 2cm radius, which is connected to ground. I am also using thin metal aluminum plates instead of the foil. I cannot the distance that I need, which is about 35cm. My question is, how do I increase the measuring distance of the plate to reach the 35cm at least?

This is the circuit

Looking forward for all suggestions and help!!!

Thanks a lot in advance!

So I am working on a project that I found online at (https://makezine.com/projects/a-touchless-3d-tracking-interface/).

However, instead of using my hand to track, I want to track an aluminum ball with 2cm radius, which is connected to ground. I am also using thin metal aluminum plates instead of the foil. I cannot get the distance that I need, which is about 35cm. My question is, how do I increase the measuring distance of the plate to reach the 35cm at least?

This is the circuit

Looking forward for all suggestions and help!!!

Thanks a lot in advance!

So I am working on a project that I found online at (https://makezine.com/projects/a-touchless-3d-tracking-interface/). However, instead of using my hand to track, I want to track an aluminum ball with 2cm radius, which is connected to ground. I cannot the distance that I need, which is about 35cm. My question is, how do I increase the measuring distance of the plate to reach the 35cm at least?

Circuit from the Makezine Project: https://makezine.com/wp-content/uploads/make-images/vnMhkLZVqZmA2rQG.jpg

Looking forward for all suggestions and help!!!

Thanks a lot in advance!

So I am working on a project that I found online at (https://makezine.com/projects/a-touchless-3d-tracking-interface/).

However, instead of using my hand to track, I want to track an aluminum ball with 2cm radius, which is connected to ground. I am also using thin metal aluminum plates instead of the foil. I cannot the distance that I need, which is about 35cm. My question is, how do I increase the measuring distance of the plate to reach the 35cm at least?

This is the circuit

Looking forward for all suggestions and help!!!

Thanks a lot in advance!