Bumped by Community user
    Bumped by Community user
6 added 175 characters in body
source | link

I am using stm32f303k8t6 nucleo board and Keil V5 IDE. I want to measure temperature with DS18S20 sensor over one wire interface. I have downloaded the HAL library from https://github.com/nimaltd/ds18b20.

But how do i add these library to my project in Keil. Can some one help.

My project window looks like this enter image description here

And the files inside the GitHub library looks like this. enter image description here

Please tell let me know what is the proper way to add these files to my project.

I have added a group to my project->Sensor->add existing files->what next?? enter image description here

I have removed the .h files, text files and licences from the Sensor folder and followed what you have suggested. enter image description here

I have done the same as above once again and it seems like added the c files to my project successfully. enter image description here But it couldn't find some other header file related to the library**(#include "gpio.h" , #include "cmsis_os.h")**. Is it the error in the library file or project setup error.?

I am using stm32f303k8t6 nucleo board and Keil V5 IDE. I want to measure temperature with DS18S20 sensor over one wire interface. I have downloaded the HAL library from https://github.com/nimaltd/ds18b20.

But how do i add these library to my project in Keil. Can some one help.

My project window looks like this enter image description here

And the files inside the GitHub library looks like this. enter image description here

Please tell let me know what is the proper way to add these files to my project.

I have added a group to my project->Sensor->add existing files->what next?? enter image description here

I have removed the .h files, text files and licences from the Sensor folder and followed what you have suggested. enter image description here

I have done the same as above once again and it seems like added the c files to my project successfully. enter image description here

I am using stm32f303k8t6 nucleo board and Keil V5 IDE. I want to measure temperature with DS18S20 sensor over one wire interface. I have downloaded the HAL library from https://github.com/nimaltd/ds18b20.

But how do i add these library to my project in Keil. Can some one help.

My project window looks like this enter image description here

And the files inside the GitHub library looks like this. enter image description here

Please tell let me know what is the proper way to add these files to my project.

I have added a group to my project->Sensor->add existing files->what next?? enter image description here

I have removed the .h files, text files and licences from the Sensor folder and followed what you have suggested. enter image description here

I have done the same as above once again and it seems like added the c files to my project successfully. enter image description here But it couldn't find some other header file related to the library**(#include "gpio.h" , #include "cmsis_os.h")**. Is it the error in the library file or project setup error.?

5 added 181 characters in body
source | link

I am using stm32f303k8t6 nucleo board and Keil V5 IDE. I want to measure temperature with DS18S20 sensor over one wire interface. I have downloaded the HAL library from https://github.com/nimaltd/ds18b20.

But how do i add these library to my project in Keil. Can some one help.

My project window looks like this enter image description here

And the files inside the GitHub library looks like this. enter image description here

Please tell let me know what is the proper way to add these files to my project.

I have added a group to my project->Sensor->add existing files->what next?? enter image description here

I have removed the .h files, text files and licences from the Sensor folder and followed what you have suggested. Please help. enter image description here

I have done the same as above once again and it seems like added the c files to my project successfully. enter image description here

I am using stm32f303k8t6 nucleo board and Keil V5 IDE. I want to measure temperature with DS18S20 sensor over one wire interface. I have downloaded the HAL library from https://github.com/nimaltd/ds18b20.

But how do i add these library to my project in Keil. Can some one help.

My project window looks like this enter image description here

And the files inside the GitHub library looks like this. enter image description here

Please tell let me know what is the proper way to add these files to my project.

I have added a group to my project->Sensor->add existing files->what next?? enter image description here

I have removed the .h files, text files and licences from the Sensor folder and followed what you have suggested. Please help. enter image description here

I am using stm32f303k8t6 nucleo board and Keil V5 IDE. I want to measure temperature with DS18S20 sensor over one wire interface. I have downloaded the HAL library from https://github.com/nimaltd/ds18b20.

But how do i add these library to my project in Keil. Can some one help.

My project window looks like this enter image description here

And the files inside the GitHub library looks like this. enter image description here

Please tell let me know what is the proper way to add these files to my project.

I have added a group to my project->Sensor->add existing files->what next?? enter image description here

I have removed the .h files, text files and licences from the Sensor folder and followed what you have suggested. enter image description here

I have done the same as above once again and it seems like added the c files to my project successfully. enter image description here

4 added 87 characters in body
source | link

I am using stm32f303k8t6 nucleo board and Keil V5 IDE. I want to measure temperature with DS18S20 sensor over one wire interface. I have downloaded the HAL library from https://github.com/nimaltd/ds18b20.

But how do i add these library to my project in Keil. Can some one help.

My project window looks like this enter image description here

And the files inside the GitHub library looks like this. enter image description here

Please tell let me know what is the proper way to add these files to my project.

I have added a group to my project->Sensor->add existing files->what next?? enter image description here

I have removed the .h files, text files and licences from the Sensor folder and followed what you have suggested. Please help. enter image description here

I am using stm32f303k8t6 nucleo board and Keil V5 IDE. I want to measure temperature with DS18S20 sensor over one wire interface. I have downloaded the HAL library from https://github.com/nimaltd/ds18b20.

But how do i add these library to my project in Keil. Can some one help.

My project window looks like this enter image description here

And the files inside the GitHub library looks like this. enter image description here

Please tell let me know what is the proper way to add these files to my project.

I have added a group to my project->Sensor->add existing files->what next?? enter image description here

I am using stm32f303k8t6 nucleo board and Keil V5 IDE. I want to measure temperature with DS18S20 sensor over one wire interface. I have downloaded the HAL library from https://github.com/nimaltd/ds18b20.

But how do i add these library to my project in Keil. Can some one help.

My project window looks like this enter image description here

And the files inside the GitHub library looks like this. enter image description here

Please tell let me know what is the proper way to add these files to my project.

I have added a group to my project->Sensor->add existing files->what next?? enter image description here

I have removed the .h files, text files and licences from the Sensor folder and followed what you have suggested. Please help. enter image description here

3 added 172 characters in body
source | link
2 more information about GitHub files
source | link
1
source | link