Timeline for DotStar Micro LED Strip individual capacitor need and PCB questions
Current License: CC BY-SA 4.0
6 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Dec 16, 2018 at 9:44 | comment | added | doppler0y | Well, thanks for helping me. I'd say your answer did help me with what I wanted to know. | |
| Dec 16, 2018 at 8:57 | comment | added | Passerby | Then adding a few 1000 uf caps along the strip would be better. Power at both ends as well. I may delete this answer since it looks like your question is different than what I assumed. | |
| Dec 16, 2018 at 8:46 | comment | added | doppler0y | Well it would be one order of magnitude higher at 2.40 meters | |
| Dec 16, 2018 at 8:29 | comment | added | Passerby | If your making a <1 meter long strip, you can use one big cap at the start, or multiple small caps. Your strip isn't exactly long at 0.03 * 8 = .240 meters. | |
| Dec 16, 2018 at 8:11 | comment | added | doppler0y | Well since I'm actually putting 8 300mm long strips inside a polycarbonate visor I could put one cap in the start of each strip, and I can put it the closest possible since I will custom made the visor as well | |
| Dec 16, 2018 at 6:53 | history | answered | Passerby | CC BY-SA 4.0 |