Skip to main content
Electrical Engineering

Return to Question

added 15 characters in body
Source Link
StainlessSteelRat
StainlessSteelRat
  • 8.2k
  • 2
  • 19
  • 34

Can iI develop an emebedded system ;embedded system; starting with protoypingprototyping by using an arduino board. Then extract the hex code that iI verified on the arduino board and load it on to a microcontroller. (Of course the target controller must be the same as the one on the board  ) It.

It comes to me as a sensible approach, may be this is the way that everyone follows. I want to learn if it is plausible or nonsense  ? Any cons and pros. Thanks

Thanks

Can i develop an emebedded system ; starting with protoyping by using an arduino board. Then extract the hex code that i verified on the arduino board and load it on to a microcontroller. (Of course the target controller must be the same as the one on the board  ) It comes to me sensible , may be this is the way that everyone follows. I want to learn if it is plausible or nonsense  ? Any cons and pros. Thanks

Can I develop an embedded system; starting with prototyping by using an arduino board. Then extract the hex code that I verified on the arduino board and load it on to a microcontroller. (Of course the target controller must be the same as the one on the board).

It comes to me as a sensible approach, may be this is the way that everyone follows. I want to learn if it is plausible or nonsense? Any cons and pros.

Thanks

Source Link
kemal
kemal
  • 155
  • 1
  • 5

Developing an embedded system; from arduino to microcontroller?

Can i develop an emebedded system ; starting with protoyping by using an arduino board. Then extract the hex code that i verified on the arduino board and load it on to a microcontroller. (Of course the target controller must be the same as the one on the board ) It comes to me sensible , may be this is the way that everyone follows. I want to learn if it is plausible or nonsense ? Any cons and pros. Thanks