Episode #125 of the Stack Overflow podcast is here. We talk Tilde Club and mechanical keyboards. Listen now
    Post Closed as "too broad" by Elliot Alderson, Leon Heller, Chris Stratton, DoxyLover, filo
2 Trimmed image.
source | link

How doare complicated PCBs are being designed?

Firstly, I've always wondered how do engineers calculate the right parameters of components (caps, resistors, inductors, ...) in big projects, such as mobile motherboards and etc. 

It feels rather complicated and very time consuming, let alone error sensitivity - one mistake and oops.... Ifoops.

If it's all about several ICs – all the passive components around it – do they just follow reference sheets of these ICs?

Also, looking to the boards with SMDs, I usually see the components tremendously aligned. Obviously, it's all about space efficiency – let's look at iPhone XR motherboard. 

If one zooms in the A12 chip, the long row of components (perhaps capacitors) might be found just above it: iPhone XR motherboard

enter image description here

And generally pretty much every component is aligned elegantly with the others, no unused space. 

The question is:  

howHow do they do that? 

Is the plate soboard multilayered to make it possible? 

If so, that's odd because no vias can be spotted in here. 

Or what elseother kind of techniques are used to design the plate thissuch complicated boards?

Do they align the components by themselves or it's beingis it done by software? 

For instance, designing a PCB in Eagle involves a manual component distribution, which is surely possible when the PCB is not complicated, but what about the other ones? I doubt they do it by hand...

Summing up the foregoing:

howHow to design a PCB this complicated??

How do complicated PCBs are being designed?

Firstly, I've always wondered how do engineers calculate the right parameters of components (caps, resistors, inductors, ...) in big projects, such as mobile motherboards and etc. It feels rather complicated and very time consuming, let alone error sensitivity - one mistake and oops.... If it's all about several ICs – all the passive components around it – do they just follow reference sheets of these ICs?

Also, looking to the boards with SMDs, I usually see the components tremendously aligned. Obviously, it's all about space efficiency – let's look at iPhone XR motherboard. If one zooms in the A12 chip, the long row of components (perhaps capacitors) might be found just above it: iPhone XR motherboard And generally pretty much every component is aligned elegantly with the others, no unused space. The question is: how do they do that? Is the plate so multilayered to make it possible? If so, that's odd because no vias can be spotted in here. Or what else kind of techniques are used to design the plate this complicated?

Do they align the components by themselves or it's being done by software? For instance, designing a PCB in Eagle involves a manual component distribution, which is surely possible when the PCB is not complicated, but what about the other ones? I doubt they do it by hand...

Summing up the foregoinghow to design a PCB this complicated?

How are complicated PCBs designed?

Firstly, I've always wondered how do engineers calculate the right parameters of components (caps, resistors, inductors, ...) in big projects, such as mobile motherboards and etc. 

It feels rather complicated and very time consuming, let alone error sensitivity - one mistake and oops.

If it's all about several ICs – all the passive components around it – do they just follow reference sheets of these ICs?

Also, looking to the boards with SMDs, I usually see the components tremendously aligned. Obviously, it's all about space efficiency – let's look at iPhone XR motherboard. 

If one zooms in the A12 chip, the long row of components (perhaps capacitors) might be found just above it:

enter image description here

And generally pretty much every component is aligned elegantly with the others, no unused space. 

The question is:  

How do they do that? 

Is the board multilayered to make it possible? 

If so, that's odd because no vias can be spotted in here. 

Or what other kind of techniques are used to design such complicated boards?

Do they align the components by themselves or is it done by software? 

For instance, designing a PCB in Eagle involves a manual component distribution, which is surely possible when the PCB is not complicated, but what about the other ones? I doubt they do it by hand...

Summing up the foregoing:

How to design a PCB this complicated?

1
source | link

How do complicated PCBs are being designed?

Firstly, I've always wondered how do engineers calculate the right parameters of components (caps, resistors, inductors, ...) in big projects, such as mobile motherboards and etc. It feels rather complicated and very time consuming, let alone error sensitivity - one mistake and oops.... If it's all about several ICs – all the passive components around it – do they just follow reference sheets of these ICs?

Also, looking to the boards with SMDs, I usually see the components tremendously aligned. Obviously, it's all about space efficiency – let's look at iPhone XR motherboard. If one zooms in the A12 chip, the long row of components (perhaps capacitors) might be found just above it: iPhone XR motherboard And generally pretty much every component is aligned elegantly with the others, no unused space. The question is: how do they do that? Is the plate so multilayered to make it possible? If so, that's odd because no vias can be spotted in here. Or what else kind of techniques are used to design the plate this complicated?

Do they align the components by themselves or it's being done by software? For instance, designing a PCB in Eagle involves a manual component distribution, which is surely possible when the PCB is not complicated, but what about the other ones? I doubt they do it by hand...

Summing up the foregoing – how to design a PCB this complicated?