Skip to main content
14 events
when toggle format what by license comment
Oct 17, 2020 at 3:38 comment added Aloha @Kripacharya I see, that makes a lot of sense!
Aug 6, 2019 at 9:41 vote accept Aloha
Aug 2, 2019 at 15:45 comment added Kripacharys If you make all your 'ideal' assumptions about insulation, corona, safety etc etc, then the answer is - YES IT CAN. The current capacity is based on maximum tolerable heat / temperature rise. Nothing else. In fact this is precisely why long haul transmission is done at such high voltages - to keep the current low for a given power transfer.
Aug 2, 2019 at 15:17 comment added analogsystemsrf If the wires are in a strongly insulating jacket, inside bundle of other hot wires, then the only heat-exit path is OUT THE ENDS. The OP stated no mechanical config.
Aug 2, 2019 at 9:48 answer added Huisman timeline score: 1
Aug 2, 2019 at 9:34 answer added Bimpelrekkie timeline score: 0
Aug 2, 2019 at 9:17 answer added Simon B timeline score: 1
Aug 2, 2019 at 5:51 answer added Sorenp timeline score: -1
Aug 2, 2019 at 5:37 answer added Neil_UK timeline score: 5
Aug 2, 2019 at 5:35 answer added jusaca timeline score: 3
Aug 2, 2019 at 5:24 comment added Neil_UK Aare you sure about that @analogsystemsrf . Given that the cooling is a function of length as well, for a straight wire shifting power from A to B. Now if the wire was bundled up like a wire wound resistor, that would have a constant thermal resistance and power and temperature rise proporiotnal to length.
Aug 2, 2019 at 5:14 comment added analogsystemsrf the length of the wire determines the total thermal resistance, thus the temperature rise.
Aug 2, 2019 at 5:11 answer added Justme timeline score: 5
Aug 2, 2019 at 4:48 history asked Aloha CC BY-SA 4.0